Lube
Recommendations
Skip to content
We would like to announce the arrival of the new product Quartz INEO FGO 5w30 to our automotive product range.
The introduction of Quartz INEO FGO 5w30 will allow us to; consolidate two key products into one, and offer a greater coverage and performance in the applications. This ensures we are keeping you up to date with the latest standards in the automotive industry.
Owing to the large number of international and OEM specifications met by this product, the decision has been made that TENZ will replace both Quartz Ineo MC3 5W-30 and Quartz Ineo MDC 5W-30 with Quartz Ineo FGO 5W-30 beginning in Quarter 2 2026.
Formulated to surpass the latest ACEA and API international standards, this synthetic oil is approved for the rigorous demands of top manufacturers, including Mercedes-Benz, Peugeot, and Renault.
Its special formulation resists extreme temperature variations and provides reliable protection in all driving conditions, from frequent starts and stops in the city to high-speed motorway travel and demanding sports driving. It is perfectly suited for modern multi-valve engines, especially those with turbochargers and direct injection.
The Low SAPS formulation (low content of Sulfated Ash, Phosphorus, and Sulfur) ensures optimal operation
and protection for the latest-generation engines equipped with anti-pollution devices.
Before using the product, the vehicle’s maintenance guide should be checked. Oil changes should be carried out in accordance with the manufacturer’s recommendations. The product should not be stored at temperatures over 60°C. It should be kept away from sunlight, intense cold and extreme temperature fluctuations. If possible, the packaging should not be exposed to the elements. Otherwise, the drums should be laid horizontally in order to avoid any contamination from water and to prevent the product’s label from rubbing off.
Quartz Ineo FGO 5W-30 meets the international specifications ACEA C2 and C3 and API SP. It carries official approval for Daimler MB 229.52, Stellantis FPW9.55535/03 (previously PSA B71 2290) and Renault RN17. It meets the requirements of Daimler MB 226.52, 229.31 and 229.51 and Renault RN0700/0710 and is suitable for Iveco 18-1811, Stellantis FPW9.55535/02 (previously FCA 9.55535-S1) and Toyota.
Read more and see the full technical data sheet by clicking below.
© COPYRIGHT 2024 TOTALENERGIES NEW ZEALAND LIMITED • DESIGNED BY COAST & CO • DEVELOPED BY MRD
